Step 5
- Drill the holes for the L-brackets. Take care not to drill
through the wood frame.
|
|
Step 6
- Attach the L-brackets using the flathead wood screws. It helps
to partially screw in each screw to insure the best alignment of
the L-bracket. Then gradually tighten the screws until the bracket
is firmly attached to the frame.
|
|
Step 7
- Cut a piece of the screen material that will be stapled to the
side of one of the frames to make the deckle. Leave one to two
inches of excess screen beyond the frame. The excess material will
be trimmed later.
|
|
Step 8
- Staple the screen on to the frame side that does not have the
L-brackets. Stretch the material as you staple to be sure that it
will be tight when finished.
|
|
Step 9
- When the screen is completely attached to the frame. Trim the
excess material using a pair of scissors.
|
|